| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Good deal on double bearing flush bits http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=4741 |
Page 1 of 1 |
| Author: | John Mayes [ Thu Jan 26, 2006 11:00 am ] |
| Post subject: | |
Flush trim double bearing shear cut: http://pricecutter.com/product.asp?pn=P12-1714 I guess this is a good deal? |
|
| Author: | John Mayes [ Thu Jan 26, 2006 11:02 am ] |
| Post subject: | |
and here is one from Whiteside with 3 straight flues, double bearings for a couple bucks more (I love whitesides bits and routerbits.com has EXCELLENT service) http://www.routerbits.com/cgi-routerbits/sr.cgi? 1138319965_25589+37 |
|
| Author: | Iplaytheoldies [ Thu Jan 26, 2006 12:24 pm ] |
| Post subject: | |
Thanks for posting, those would definately come in handy. |
|
| Author: | Alain Desforges [ Fri Jan 27, 2006 3:19 am ] |
| Post subject: | |
Good post. I think those are good prices as well... Thanks for the heads up, John. I've gotten very good service (expediency and quality of product) with this company as well. http://www.ridgecarbidetool.com/ I especially like the fact that they carry sizes in /32... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|